MFA: Token Config

 _{How to Setup the MFA-Token}

Setup-Video

Download, extract and start the NFC-Burner Tool (https://www.token2.com/site/page/windows-nfc-burner)

Navigate to https://aka.ms/setupmfa (login to your Office365 Account) and follow the following Instructions 

Setup Instructions (Text & Picture)

1: Download, extract and start the NFC-Burner Tool (https://www.token2.com/site/page/windows-nfc-burner)

Navigate to https://aka.ms/setupmfa (login to your Office365 Account) and follow the following Instructions 

2. Copy the "Secret Key" shown in the next picture.

3.Open the NFC Burner Tool ( https://www.token2.com/site/page/windows-nfc-burner ) 

Attention: You need to select "Broadcom Corp Contactless Smartcard" as the Device and click "Connect" 

Now just add the previous Secret key into the red marked area

4. Use the Dell Tecalliance Notebook to "Burn" the Token 

5.Press the "on/off" button on the Token to display a numeric code. Then place the device on the NFC sensor (Sensor is shown in previous picture). 

6. Click on "Burn Seed"

Troubleshooting: If the device is not recognized by the laptop, make sure "NFC" is enabled or disable and enable it again. (Windows Start-Menu → type "NFC" → Turn Wireless Devices on or off→ check NFC)

If everything worked this little confirmation in the LOG will appear

Almost done! click "Next" in the Browser

ATTENTION: wait until the first code on the Token is gone, press the button again and use the numeric code on the token to complete the process.

congratulations, you did it! 

Note: 

Please keep in mind, the progam files may change, actually there are a few more files!

Please copy all files into a new folder on your computer, then run the Token2 NFC Burner.exe and click on "more information" and "Run anyway".